Back to top
   Call Me Free Send SMS Send Inquiry

Machine Accessories

We provide a wide range of Lathe Accessories to enhance the performance of the machine. Being a reliable manufacturer and supplier, we understand that how important accessories are, as it gives the operator an additional help to support and carry out functions as per their requirement. We provide Lathe Machines in standard design and lathe accessories can be used to get the desired result. The most common Lathe Machine Accessories are Chuck, which is used for holding and rotating the work-piece. Another accessory is Lathe Carrier or Dog, which helps in rotating the work-piece held between centers. There are two types of centers available with us: Live Center and Dead Center.

Key Features

  • Driver Plate is provided which is bored out and threaded to make it suitable for the spindle hose.
  • Face Plate is available with us to clamp the work-piece at the face of the plate for high precision cutting.
  • We have Lathe Mandrel located at the center of the machine on which work revolves around. The mandrel is suitable for holding hollow work-piece.
  • Steady Rest is available to keep the long work-piece in a fixed state as cutting tools may stress on the piece to move.
Product Image (1977)

Splash Guard For Lathe

Price: 6500 INR/Piece

Stores Waste – Improves cleanness – Essential when more than one machine installed – Protects Operator from Metal Chips & Coolant ater – Better Safety While Operation.The only problem is the small step the covers the motor. As you can see from the photo, it tends to kick up a bit, which makes the gap between it and the saddle very small. But I think a bit of pounding with the mallet should straighten that out – in a week or so, when the paint sets a bit more. Then the simple process of welding in the new pieces. That has been done, sort of. It is so warped it is not funny. It still needs to be sanded then painted. If it looks acceptable I may post pictures. Weight: 17 Kg

Product Image (1977)

C Clamp

Price: 3000 INR/Piece

C-clamps are typically made of steel or cast iron though smaller clamps may be madeof At the top of the “C” is usually a small flat edge. At the bottom is a threaded hole through which a large threaded screw protrudes.When the clamp is actually used, it is very rare that this occurs. Generally some other object or objects will be contained between the top and bottom flat edges. C Clamp Set 4″ 6″ 8″ Weight: 5.8 Kg

Product Image (1977)

Spirit Level

Price: 699 INR/Piece

Sprit levels never go a-miss as they are for any use. In a range of different sizes measure up and do the job properly aligning the bubble level to the center. Comes with rubber ends to reduce the risk of scratching or damage. Weight: 0.234 Kg

Product Image (1977)

Curved Jaw Locking Plier

Price: 699 INR/Piece

Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle. Weight: 0.55 Kg

Product Image (1977)

Hand File Set

Price: 2999 INR/Piece

9-piece- American- example hand record set with ergonomic handles incorporates a grouping of document profiles, cuts, and lengths for forming, honing, and uprooting material in both home and expert applications. The set incorporates a 6″/150 mm twofold additional thin decrease, 6″/150 mm thin decrease, 8″/200 mm half-cycle, 8″/200 mm level, 10″/250 mm half-cycle, 10″/250 mm level, 10″/250 mm cycle, 10″/250 mm factory, and 12″/250 mm plant record. Weight: 0.6 Kg

Product Image (1977)

Combination Try Sqaure

Price: 3300 INR/Piece

12-inch Heavy-Duty Professional Combination Square with Etched Stainless Steel Blade and True Blue® Vial. -The e250 Combination Square features a stainless steel blade and matte finish that will never rust or corrode. -The True Blue® vial is guaranteed accurate to within .00050 inch and It carries a lifetime guarantee. Weight: 1.215 Kg

Product Image (1977)

Magnetic V Block Set

Price: 4999 INR/Piece

For use with magnetic chucks, these V-blocks sets are precision ground and secure in any position. Strong magnetic force means there’s no wasted time fooling with traditional clamps. Sold in pairs.- Magnetic V Block Set 65x60x50 80x65x60 Weight: 3.05 Kg

Product Image (1977)

Figure Punch Set

Price: 599 INR/Piece

Figure Punch Set that is available with 27 sticks. Manufactured by making use of quality approved carbon steel and innovative technology under the strict vigilance of our diligent professionals, the punch set provided is highly preferable for the installation in various punching machines.his Figure Punch Set in different specifications at rock bottom prices within the estimated time span. Weight: 0.552 Kg

Product Image (1977)

Drill Bit Stand Mm

Price: 199 INR/Piece

Stand holds 25 drill bits in inch sizes 1 mm to13 mm -Increments and has mounting holes for hanging on a wall -Labeled storage holes for identification and organization -Made of steel for durability Weight: 0.055 Kg

Product Image (1977)

Micrometer Two Peace Set

Price: 2799 INR/Piece

UNBRAND TWO PEACE SET: RANGE : 0 TO 25mm / 25 TO 50mm WEIGHT – 450 APPROX USE : The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.Micrometers are also used in telescopes or microscopes to measure the apparent diameter of celestial bodies or microscopic objects.

Product Image (1977)

Magnetic Stand With Dial Gauge

Price: 3099 INR/Piece

UNBRAND SIZE:0.1mm Weight : 1kg (Approx). Weight: 1 Kg

Product Image (1977)

Letter Punch Set

Price: 1999 INR/Piece

Manufactured by making use of quality approved carbon steel and innovative technology under the strict vigilance of our diligent professionals, the punch set provided by is highly preferable for the installation in various punching machines.his Letter Punch Set in different specifications at rock bottom prices within the estimated time span Weight: 1.64 Kg

Product Image (1977)

Spring Out Side Caliper Set

Price: 899 INR/Piece

All Three Pieces Are Included In This Set-the outside, The Outside, And The Divider Caliper -Each Of These Spring Calipers Is 8 Inches Long And Equipped With A Screw Spring -These Spring Calipers Are Used To Measure And Transfer Measurement One Place To Another -This Set Is Great For Woodworkers For Measuring Joints-also For Drilled Hole Dimensions -All Three Pieces In This Set Have All-metal Construction, And They Come In A Vinyl Bag -Spring Out caliper Set 4″ 6″ 8′ Weight: 150 Kg

Product Image (1977)

Tap And Die Set Steel Assorted Set Screw Extractor Tap Die Adjustable

Price: 2999 INR/Piece

6pcs Tap & Die Set Steel Assorted Set Screw Extractor Tap Die Adjustable Tap Wrenchench. Hardened and tempered carbon steel and nickel plated for corrosion protection. Serrated gripping jaws, adjustable opening with quick release lever. Weight: 0.9 Kg

Product Image (1977)

High Speed Steel Drill Bit Sets 1 Mm To 13 Mm

Price: 4600 INR/Piece

High-Speed Steel Drill Bit Sets MM-Bit is constructed high-speed steel for the best combination of strength, heat resistance, and wear resistance Standard 118-degree point for use in wood, metal, and plastic 25 bit set 1 mm to 13 mm. Weight: 0.8 Kg

Product Image (1977)

Tool Bag With Tools

Price: 4599 INR/Piece

COMFORTABLE TO CARRY: Padded Free carrying handles. Adjustable straps and large pads for extra comfort. Stitching Made with 600D. Polyester for maximum durability. Rubber foam bottom keeps the bag sturdy. Protects contents from hard falls.

Product Image (1977)

Screw Driver Set

Price: 499 INR/Piece

Type: Combination Tip Type: Polydrive, Phillips, Line Usage: Household Product Type: Screwdriver Set

Product Image (1977)

Hand Drill Machine

Price: 699 INR/Piece

Suitable For Small Drilling Applications Where Accuracy And Control Are Required

Product Image (1977)

Sheetl Metal Tools Tray

Price: 1750 INR/Piece

It is necessary to have a machine shop of tools tray. This tool tray is used for lathe, drill, milling, slotting machine. This tools tray is of sheet metal. This tool tray has PU color. This tools tray has a dual-tone color On top of this tool tray, you can place the lathe tool holder, drill bit, drill chuck, fix spanner, true chuck key.

Product Image (1977)

Multi Angle Magnetic Clamp Welding

Price: 950 INR/Piece

Item Dimensions LxWxH:- 18 x 10 x 10 Centimeters Colour:- RED Item Weight:- 550 Grams Pack Of 2 Pcs.

Product Image (1977)

100m to 250mm Bench Vice

Price: 3500 INR/Piece

Material: Ductile Iron Type Of Vice: Bench Vice Usage/Application: Industrial Jaw Opening (Inch): 6 Inch, 8 Inch, 10 Inch, 12 Inch. Base Type: Fixed

Product Image (1977)

Coolant Pump

Price: 6999 INR/Piece

COOLANT PUMP AND STEEL TANK SINGLE-PHASE Submersible pump (Plastic Body) & 3PH Cast Iron Immersion-Type Coolant Pump. This in-tank coolant pump is suitable replacement for many coolant pumps used on lathes, milling machines, grinders,mini lathe,drill machine and other machinery. The square-shaped mounting plate has 4 holes.A quick comparison with your coolant pump would determine if it’ll fit.Coolant output connection is NPT female 3/8″ pipe size. Shaft length (the section immersed in coolant tank) is 180mm (7″).

Product Image (1977)

Lathe Machine Surface Gage

Price: 990 INR/Piece

Surface gage [ 9″] Steel ruler [6″ 12″ 24″] – 3 pic set. Weight : 1Kg. (Approx)

Product Image (1977)

Screw Pitch Gauge

Price: 499 INR/Piece

Our Screw Pitch Gauges are very handy tool for gauging threads. We make our Screw Pitch Gauge available at very economical price. -Measuring thread and external thread tooth pitch. -The Screw Pitch Gauge provided by us is made up of high quality tool Steel and is appreciated for its efficiency and high performance. Weight: 0.081 Kg

Product Image (1977)

Drill Stand

Price: 199 INR/Piece

Stand holds 25 drill bits in inch sizes 1 mm to13 mm -Increments and has mounting holes for hanging on a wall -Labeled storage holes for identification and organization -Made of steel for durability Weight: 0.055 Kg

Product Image (1977)

Feeler Gauge

Price: 249 INR/Piece

A feeler gauge is made up of a series of steel plates or blades which have a progression of very precisely calibrated thicknesses often joined at one end with a pin or rivet and which fold back like a fan into a handle. Each blade is marked with its thickness. A feeler gauge is used to measure or set very small gaps, normally under 1 mm. When the blades are folded back into the handle, the thin, delicate blade are protected. The thickest possible blade that can be inserted into a gap or crack shows its width. Weight: 0.074 Kg

Product Image (1977)

Degree Protector

Price: 499 INR/Piece

Degree Protector in 6″ / 150mm Consists of a Semi-Circular head Graduated Blade of 8″ Length Graduated Up to 6″-15cms. Weight: 0.058 Kg

Product Image (1977)

Centre Drill Bit

Price: 2500 INR/Piece

Center Drill bit for drilling components that require machining between centers. Has a 120 & deg point angle with a 60 ° included countersink.

Product Image (1977)

Lathe Pipe Center

Price: 2300 INR/Piece

It’s used for center in the bore of a pipe Securely supports the working job Material like Thin-walled Size: MT-3 MT-4 Weight : 2 Kg. (Approx).

Product Image (1977)

Milling Universal Vice

Price: 16000 INR/Piece

Milling Vice Use of universal Milling & Vertical Milling Machin Size : 125 to 150 mm Universal vice laws the Work Piece to be set at any desired compound angle Colour – Black/ Blue/ Gray

Product Image (1977)

Lathe Square Tool Post

Price: 3500 INR/Piece

The single tool post consists of a circular body 1 with a collar at one end and a threaded hole at the other. A vertical slot is provided in the body to accommodate the tool/tool holder. The body is slid through the square block 5, which is finally located in the T-slot, provided in the compound rest. The design permits rotation of the body about the vertical axis. – Holds 3 Tool – Fits on Top Slider – Turning & Bore operation Weight: 7 Kg

Product Image (1977)

CHUCK PLATE

Price: 1800 INR/Piece

Mounts Chuck on a Spindle – LOO Type & A2-4 Type Available – Quick Release – Repeatability – Accurate Mounting – 20 GCI Grade Cast Iron. -Made in accordance with the well-defined quality standards of the industry, these Chuck Plate are widely demanded among patrons. We keep in mind the industry set quality standards while manufacturing these Chuck Plate. Weight: 6 Kg

Product Image (1977)

Knurling Tools

Price: 549 INR/Piece

This tool is mainly suitable for producing RAA straight knurling profiles.Serration between tool holder and cut knurling head provides extra rigidity and reduced wear on the knurling wheels. 5/16″ x 3/4″ Shank, 6 Head Knurling Tool Holdersix head. This knurling tool holder features robust construction with six hardened and precision ground wheels; fine, medium and coarse knurls for forming diamond patterns. It also has a lock knob, used to secure the head and wheels in position.

Product Image (1977)

Milling Dividing Head

Price: 32999 INR/Piece

Milling Machine Accessories Use only universal Milling 01/02 Model Adjustable Movements/ Including Plate Common jobs for a : milling cutter, cutting the teeth of a gear, milling curved slots Colour – Light Blue

Product Image (1977)

Key Way Attachment With Motor

Price: 15999 INR/Piece

It’s also useful to make a holes in long shaft. Holds Any Shape JOB – End-mill Cutter gripped with Spindle. Key way attachment with motor works with the movement of Cross Slider. Grooving Operation.

Product Image (1977)

TOOL POST GRINDING

Price: 16999 INR/Piece

Grinding Fitting Wheel Size:- 6″ & 8″ Motor:- 2800 RPM Spindle Speed:- 3000 EXT./16800 INT. Spindle Pulley:- 2 Inch Motor Pulley:- 2.5 Inch

Product Image (1977)

Drill Bit Shank Grind & Sharpening

Price: 2900 INR/Piece

This equipment can grind from 3 mm to 18 mm 59 degree For the General Purpose 68 degrees For High production 49 degrees For Soft Material 41 degrees For Counter Sinking 88 degrees For Thin Material.

Product Image (1977)

Lathe Carriage Stopper For Turning

Price: 1400 INR/Piece

6 Station Carriage Stopper For Lathe Machine Free With BANKA Lathe Machine Save Time And Money Low-Cost Lathe Accessories Turner Likes Very Much

Product Image (1977)

Lathe Machine Cutting Tool For 3 To 8 Feet Machine

Price: 1500 INR/Piece

Carbide tip tools. Grooving tool. Cut-Off blade. Parting blades. Boring bar. Side tool. STRAIGHT FINISHING TOOLS 19 mm x 125mm

Product Image (1977)

Lathe Machine Cutting Tool For 9 To 20 Feet Machine

Price: 4300 INR/Piece

Carbide tip tools. Grooving tool. Cut-Off blade. Parting blades. Boring bar. Side tool.

Product Image (1977)

Tilting Table

Price: 48000 INR/Piece

Use For Redial Drill Machine 0 – 60 Degree Range (Both Side). Height: 300 mm Working: 500mm x 450mm Manufactured from High-Grade Casting. Number of T-slot : 3 Approx Weight : 200 kg.

Product Image (1977)

Steady Rest

Price: 2599 INR/Piece

Makes Lengthy Job ‘Steady’ – Prevents unwanted movement of job – Bearings Available On Pin Tip. To setup the rest, first machine and polish the portion of the work that is to be used as the bearing surface. Clean the portion of the ways where the steady rest is to be mounted, place the steady rest on the ways and clamp loosely. Open the top of the steady rest and place the workpiece in the chuck with the bearing surface over the adjustable jaws. Clamp the steady rest securely to the ways. Close the top of the steady rest and adjust the jaws to the workpiece. Weight: 10 Kg

Product Image (BNK AC018)

Drill Chuck With Key

Price: 1399 INR/Piece
  • Supply Ability:500 Per Week
  • Delivery Time:7 Days
Product Image (BNK AC01)

Revolving Centre

Price: 2100 INR/Piece
  • Delivery Time:7 Days
  • Supply Ability:500 Per Week
Product Image (BNK AC013)

Machine Lamp

Price: 899 INR/Piece
  • Material:Plastic
  • Type:Lamp
  • Delivery Time:7 Days
  • Supply Ability:500 Per Week
Product Image (BNK AC014)

Taper Turning Attachment

Price: 7500 INR/Piece
  • Delivery Time:7 Days
  • Supply Ability:500 Per Week
Product Image (BNK AC06)

Collet Adaptor

Price: 2500 INR/Piece
  • Supply Ability:500 Per Week
  • Delivery Time:7 Days
Product Image (BNK AC10)

Milling - Adapter ISO 30 - 40

Price: 4000 INR/Piece
  • Color:Silver
  • Material:Stainless Steel
  • Delivery Time:7 Days
  • Supply Ability:500 Per Week
Product Image (BNK AC012)

Quick Change Tool Magnetic Chuck

Price: 6500 INR/Set
  • Delivery Time:7 Days
  • Size:25x25x50mm
  • Color:Blue
  • Material:Cast Iron
Product Image (11)

R-F Switch with 3 Mtr Wiring (1kg)

Price: 390 INR/Piece
  • Supply Ability:6 Per Week
  • Delivery Time:1 Week
Product Image (23)

Key Way Jaw (12 Kg)

Price: 6999 INR/Piece
  • Supply Ability:10 Per Week
  • Delivery Time:10 Days
Product Image (15)

Dog Chuck 8inch (16 Kg)

Price: 12900 INR/Piece
  • Delivery Time:1 Week
  • Supply Ability:4 Per Week
Product Image (14)

True Chuck 6inch (11 Kg)

Price: 14500 INR/Piece
  • Supply Ability:4 Per Week
  • Delivery Time:1 Week
X


Banka Machine
Banka :- 2, Samrat Industrial Area, Gondal Road, Rajkot - 360004, Gujarat, India
Phone :+918035063593
Mr Samrat S. Rathod (Director)
Mobile :918035063593
Trust Stamp

   Call Me Free Send SMS Send Inquiry