Revolving Centre

Double Bearing Mechanism. Two Anti Friction Bearings. Made of Hardened and Ground High Carbon Steel. Hardened on Tip 55 to 62 HRC Hardened Centre Shaft with 60? point. Special Steel Housing. Single Row Deep groove ball bearing and Taper Roller bearing to absorb combined radial and thrust loads

·         Three  Portion  is  ground  and Hardened

·         These  Arbors  are  designed  for applications where tampered  and hardened  arbors  can't  be  used

·         Straight  shank  portion  is  soft which can be machined  to  adopt

·         Consists of Three anti-friction Steel bearings.

·         One needle roller bearing, one thrust ball bearing

·         and  one deep groove ball bearing.

·         Well lubricated to protect against contaminants and coolants.

·         Hardened and Ground (60-62 HRC) Steel with 60° tip angle.

·         Run out within .0002" (.005 mm).

·         Bearings are Pre-loaded and pressed to avoid starting loads.

USAGE & ADVANTAGES :-

It also called a Live Center, it is essential for between enters turning. Essential For Shaft Turning   

·         For Lengthy Jobs

·         Speedy & effective work

·         International standard

·         Optimum output

·         Quality tested

 PRICE :