In Ordinary Straight Turning, The Cutting Tool Moves Along A Line Parallel To The Axis Of The Work, Causing The Finished Job To Be The Same Diameter Throughout.
When The Diameter Of A Piece Changes Uniformly, From One End To The Other, The Piece Is Said To Be Tapered. Taper Turning As A Machining Operation Is The Gradual Reduction In Diameter From One Part Of A Cylindrical Workpiece To Another Part. Tapers Can Be Either External Or Internal. If A Workpiece Is Tapered On The Outside, It Has An External Taper; If It Is Tapered On The Inside, It Has An Internal Taper.
In Inch System Tapers Are Expressed In Taper Per Foot, Taper Per Inch, Or Degrees. While In Metric System Expressed As Ratio Of 1 Mm Per Unit Of Length.
Certain Types Of Small Tools And Machine Parts, Such As Twist Drills, End Mills, Arbors, Lathe Centers, Etc., Are Provided With Taper Shanks Which Fit Into Spindles Or Socket Of Corresponding Tapers, Thus Providing Not Only Accurate Alignment Between The Tool Or Other Part And Its Supporting Member, But Also More Or Less Frictional Resistance For Driving The Tool.
Tapers Are Classified By American Standards Association As Self-Holding Tapers And Steep Or Self-Releasing Tapers
Self-Holding Has Been Applied To The Smaller Tapers-Like Morse And The Brown & Sharpe- Because, Where The Angle Of The Taper Is Only 2 Or 3 Degrees, The Shank Of A Tool Is So Firmly Seated In Its Socket That There Is Considerable Frictional Resistance To Any Force Tending To Turn Or Rotate The Tool Relative To The Socket. The Term Self HoldingÃâÂ Is Used To Distinguish Relatively Small Tapers From Larger Or Self Releasing Taper.
These Are Classified As Follows :
Used For Drills, Reamers, And Lathe Center Shanks
Brown & Sharpe Taper
Used For Taper Shanks On Tools (End Mills, Arbors, Reamers, Collets Etc.) Generally Used On Brown And Sharpe Machines
Used In Lathe And Drill Spindles
Standard Taper Pins (1/4 Inch Per Foot)
Used For Positioning And Holding Parts Together
It's Useful In Threading On Work Piece Inside As Well As Out Side.
Any Length Of Work Piece Can Be Tuned.
At Set Position Accessory Can Be Left.
With Taper Turning We Can Easily Do Narrow Boring.
Fast And Consistent Accuracy Up To 300 Mm Taper Turning Job More Production Of Tapper Jobs
Consistent Accuracy Up To 300 Mm
Weight - 18Kg
Cash in Advance (CID), Cash Advance (CA), Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C)
500 Piece Per Week
Sample costs shipping and taxes has to be paid by the buyer